Why Steroids Should Not Be Toterated Essay - 865 Words

â€Å"STEROIDS† Most people nowadays are engaged into body building especially men. Some men use bodybuilding as a tool to look good and to look fit. However, sometimes, men are very impatient to their progress; they tend to look for an alternative supplement that can boost the growth of their muscles for a short span of time. Steroids will do, but unfortunately, it is illegal without consent of a doctor. Nevertheless, the use of steroids should not be tolerated due to the fact that it’s expensive, it’s unnatural and it’s unhealthy. Steroids are very expensive in such a way that an individual should have a certain amount of money in order to have it. An individual must also follow a specific cycle so that the effect of steroids†¦show more content†¦There are two types of steroids: cortico steroids and anabolic steroids. Corticosteroids are used for medical purposes such as treating swollen skin, insect bites, and pain. On the other hand, anabolic steroids can also be used as medicine for treating late puberty, muscle loss, and AIDS. However, there are some athletes addicted to winning, which leads to their abuse of steroids. Furthermore, some people are also addicted in having aesthetic bodies. They refer to steroids as supplements in order to attain the body they dream of. In other words, these people perceive that anabolic steroids are not used for medicine. Instead, they use it for their own purposes. Moreover, steroids are unnatural because the recovery of the muscles is much faster than the usual . For instance, a guy on steroids just came from the gym yesterday finishing a chest workout and decides that tomorrow is good for another set. He would feel nothing since the recovery of the muscles is faster than the usual. Also, he can lift twice the intensity than he does normally. He feels like he is a robot since he does not feel exhaustion. Nonetheless, steroids are unnatural due to the fact that the growth of the muscles is much bigger than the usual. Research shows that an average person can gain muscles for about 1-2 pounds of muscles every month. However, if an individual is on steroids, he may gain at least 5-10 pounds of muscles every month. In other words, when using steroids, the growth of the

The Impact Of Immigration On Hong Kong Essay - 1970 Words

Jonathan Cheng Michelene Perez ENGL 1010D- 50D Jan 15, 2014 Prof Draft The Effect of Immigrants in Hong Kong Hong Kong is a big city. She has four hundred and twenty-six square mile, but seven million people live in there. Even though so many people in here, the government still allows one hundred and fifty immigrants from China to live in Hong Kong each day. The people continued coming, even after the immigration laws had relaxed. We will have more and more people to live Hong Kong. If we still have one hundred and fifty immigrants to come to Hong Kong every day, we will have eight million people in 2016. It is a huge population for a city. It will affect the social resources for citizens. The immigrants have brought a lot of negative and positing affecting welfare, housing, and economy. First of all, the medical, education, and comprehensive social security assistance in Hong Kong is not sufficient for the citizen. The medical is part of the welfare in Hong Kong. The government will help pay part of the bill, if go to the public hospitals. Also, the e mergency ambulances have promised to will arrive within 12 minutes from the time of call to the arrival of an ambulance at the street address. Now, we have more people live in here, so the requirement of the emergency calls is increased. The emergency ambulances are not enough. Each car has to work sixteen to twenty times every day. If we have a serious accident, the emergency ambulances are not enough. Before theShow MoreRelatedHong Kong Housing Problem Is Not Only Attributed to the High Population Density1219 Words   |  5 PagesHong Kong Housing Problem is not only attributed to the High Population Density Every Hong Kong citizen knows one of the grave troubles in Hong Kong is housing problem. The order of severity can be apparently reflected by many figures in recent research studies. †Rents up 22 per cent in Hong Kongâ€Å" (2011) remarks that â€Å"the price of renting two-bedroom accommodation rose by 22% to US$2,830 a month between 2009 and 2010â€Å" ( ¶2). Subcommittee on Building Safety and Related Issues (2010) also observesRead MoreDiscrimination Against Immigrant Labor Essay964 Words   |  4 PagesThe global mobility of human resources between countries is a key driving force of the currently ongoing economic and regional development all over the world. It is indisputable that the immigration of international labour force would exert many positive and important impacts on the economic, cultural and social structure of both migrant-receiving and migrant-sending countries. Actually, the trend of temporary and permanent immigrants increasing in some western countr ies began to gain momentum inRead MoreGlobalization Is Affecting The People Of Hong Kong1281 Words   |  6 PagesRough Draft #1 Hong Kong is a region of China that has a tumultuous past. It was colonized by the British, captured by Japan, given back to the British, and eventually losing its sovereignty to China. The people of Hong Kong are an interesting mixture of economic classes, races, religions, and opinion. Recently, they’ve been in the news due to their protests for the hope of democracy in the region. This paper is an examination of how globalization is affecting the people of Hong Kong, and how theyRead MoreEssay on The Aging Population of the Last Century967 Words   |  4 Pagesrate. Immigration is a direct and fastest way to replace the shortage of worker in the market. Many countries in the world has experienced the aging population problem, different countries have different ways to solve it. Canada is importing the young labor force all over the world to replace the labor supply due to the lost cause by aging. The immigratants help to replace the position that the Canadians do not to work on. Also, â€Å"the Conference Board of Canada has found that immigration has aRead Moreshould same sex marriage be legalized in hk?1052 Words   |  5 Pagesï » ¿HKIED Academic Writing Skills ( CLE - 1163 - 01E ) Name: CHAN, TAK KEUNG Student number:11089661 (Year1 ) Name: YUEN, HO YEE Student number: 1108968 ( Year 1 ) THESIS STATMENT: SAME SEX MARRIAGE SHOULD NOT BE LEGALIZED IN HONG KONG In 2013, there are 0.7 percent of all population in the world is homosexuality. ( Posner, 2013 ). There also are many protest demonstration to raise public awareness about against discrimination in homosexuality or fight for legal homosexual marriageRead MoreQuestions On Rationale For Study Essay1884 Words   |  8 PagesFor example, Hong Kong has a multi-cultural environment due to the vital role performed by the multi-national citizens’ structure. The various cultures in Hong Kong were increased, accompanying the increasing numbers of immigrants. As a result of this, the differences among cultures were also enlarged. This proposal is going to evaluate the reasons why new immigrants, even the mainland Chinese immigrants who have similar culture to Hong Kong, are treated differently from the Hong Kong-born citizensRead MoreRelationship Between China and Hong Kong4329 Words   |  18 Pagesbetween Hong Kong and mainland using concepts introduced in this course. Introduction Hong Kong, located at the southern coastal of China, fully shows the diversification of culture, with a mix characteristics of different backgrounds. Hong Kong is currently under the rule of the PRC as a special administrative region, with the practice of ‘One country, two system’. Hong Kong exercises capitalism under the rule of the British government and thus continues its practice after the handover. Hong KongRead MoreEssay on The Fear of Fat Criterion Within the DSM IV1626 Words   |  7 Pagesmay cause one to overlook or disregard the pressures of societal systems, such as immigration or poverty, on the mental and physical well being of an individual. If ‘fat phobia’ is indeed a culturally constructed definition of anorexia nervosa, it lacks a strong psychological and biological foundation, and is therefore questionable in the eyes of many researchers and clinicians. To observe the impact of culture on attitudes towards eating and perception of body shape, Lake, StaigerRead MoreJd Wetherspoon976 Words   |  4 Pagesfacilities and so on. Therefore American needs more nature resource than before. Firstly, immigration helps late Twentieth Century Massachusetts economy in America. More specifically, during in 1970s, as population of Massachusetts move to other place and Massachusetts of birth rate decreased sharply. Massachusetts suffered from urban flight, closing industrial, and so on. However, in 1980s considerable immigrations that come from different countries settled in Massachusetts, which bring a host of laborsRead MoreMainland China Visitor: Impact of Hong Kong4377 Words   |  18 Pagesabout that the Mainland China visitor affecting Hong Kong tourism industry. For evidence for the most of Mainland people accounted for traveler in Hong Kong. The evidence will be mentioned the profile of them such as states and period by Yip Hiu Yi’s individual report. Lam Chi Longs individual assignment mentioned that spending of Mainland China traveler. According this report, we knoew whether they can substantially raise the revenue of Hong Kong. Moreover, â€Å"Zero-fee tour was a hot topic in recent

Arab Culture Essay Example For Students

Arab Culture Essay The Arab culture has always been criticized by the westerns as uncivilized and barbaric. On the other side, the Arabs thought of the westerns as infidels and unwise people. This led to a great deal of conflicts between the two cultures, which remain until this moment. It is a meaningless question to ask which culture is better, but a more definitequestion is which culture is better at what? The western culture for example appears to be more successful in business, economics, science, liberty values and retains a higher standard of living than those of Arab cultures. While the Arab culture appears to have a more emphasized moral approach, which appears in the low rate of crime and social problems such as divorce, drug addiction and so forth when compared to the western culture. Yet while living in the globalization age both cultures are forced to adopt each ones ideas and beliefs , but what it could be the values and ideas that westerns will borrow from Arabs and those that Arabs will borrow from westerns. Most of people will think that there is not much to benefit from the Arab culture. This is totally misleading and not based on any facts, the westerns can benefit tremendously from the Arab culture in numerous ways. Signs of adopting social manners are starting to appear in the western cultures as many families are starting to encourage social ties and habits of those of the Arabs. Many western parents are encouraging their children to stick to their religion and behave according to it. As a result, the rate of teen pregnancy and divorce rate and drug addiction has recently decreased in many western countries. Moreover they westerns are starting to appreciate the value of family ties, larger family size and increased number in-laws is a sign of adoption of Arab beliefs. Day after day, more morals and values are embraced by the westerns from the Arab culture. On the other side, the Arabs believe they have a lot to gain from the western culture. They started to take on the westernized practical way of living; and are beginning to liberate their societies and acquire business and economic experience from the westerns. Several examples of westernization reside in the economy of the Arab countries. The adoption of the free market economy is one of the most noticeable examples; other methods of western methods in running countries policies are also adopted. While on the social level Arabs seems to be exchanging roles with the westerns. As they are starting to leave the ideas of family ties and change to the less family size and a more materialistic view, as the rate of marriages are starting to decrease in most of the Arab countries. Furthermore, the rate of crime is increasing as the Arabs begin to leave their strong religious ties and beliefs. Moreover, Arabs are adopting the manners that the western are trying to abandon now such as premari tal sex and divorce. In conclusion, both Arabs and westerns need each other, but they must think of what beliefs should be adopted and not to romanticize each other. Moreover, time will show us if the morals and religious beliefs can co-exist with materialistic achievements or it is a companion for only the poor and less developed cultures.

Integrated Supply (Logistics) Chain System

Executive Summary Due to globalization in business environment, organizations are shifting to supply chain management in a bid to attain competitive advantage, with the need for customer-based approaches gaining popularity. In this case, companies are required and even forced by circumstances to initiate and implement the most effective strategies that will lead to customer satisfaction and growth.Advertising We will write a custom report sample on Integrated Supply (Logistics) Chain System specifically for you for only $16.05 $11/page Learn More In this view, integration of supply and logistics components enables a company to align its goals more productively to its suppliers and customers’ needs. Trento is one company that is facing numerous challenges due to lack of an integrated logistics system. This has seen the company lose two of its clients, and possibilities of losing the third client are evident. To avert this situation that may not aug er well to the company, it has been established that developing and implementing a successful integrated logistics system will save the company. Throughout this report, problems of Trento are established, discussed within the perspectives of supply chain management and subsequently the need of developing an integrated logistics systems evaluated. Benefits of the systems are outlined, which will contribute to better performance of Trento as a company if it adopts the developed integrated logistic system. Introduction The global business environment is changing at a fast rate, exerting pressure on different firms to remain dynamic both in operation and strategy. Part of this dynamism has been contributed by globalization, which is fast revolutionizing how business is conducted both locally and internationally (Power, 2005). Some of the areas experiencing profound changes as a result of these forces include logistics, supply, distribution and procurement of products and services. Today , organizations are under constant pressure to adopt the most efficient and effectively logistic, supply, and distribution systems that meet customers’ needs and demands, firms’ objectives and also business environmental challenges (Stock, Greis and Kasarda, 2000). It is anticipated that, as globalization continues to influence overall business and market environment, firms have no alternative but to adopt and implement supply and distribution management systems in order to compete more effectively (Power, 2005).Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Effective supply and distribution management system being advocated for should be integrative in nature, whereby, different parts of the firm are unified in a system that answers the needs of the organization in the most productive way (Gunasekaran and Ngai, 2004). This report looks at the logistic, supply and distribut ion problems facing Trento, how effective they can be resolved through an efficient, integrated supply and distribution system and subsequently, advice its client Elle Sport Company whether to halt or continue its cooperation with the company. Background and Problem Identification Elle Sport, a sports and accessories retail firm in Australia cooperates with Trento as one of its main manufacturing suppliers, specifically in the supply of women shoes. Trento’s supplies to Elle’s outlets; however, its inadequate capacity becomes a hindrance in meeting the contracted lead-time of 10 days. Due to this problem, Trento in the recent past has been evaluating the possibility of modifying its entire logistics and distribution channels that would see the company effectively meet its customer’s needs more efficiently. Trento has only five purchasing personnel who have to multi-task in such areas of facilitating ordering of all the company’s items (both stationary and equipment). At the same time, the company is yet to computerize its ordering system, a situation that customers want changed. Ordering is largely done orally, although written purchase orders are sent later, a situation that sometimes results in errors such as incorrect writing and ineligible work, hence the need to be redone. Moreover, â€Å"there is a â€Å"logistics† group that is responsible for distribution, warehousing, and inwards freight,† where it works largely independently, while â€Å"procurement, marketing, and other departments operate on their own procedures† (Gunasekaran and Ngai, 2004). This scenario has become alarming, especially to the management team of Trento, specifically after cancellation of orders by two significant clients, and Ellen likely switch to another supplier soon. Logistic management Management of companies in modern world is changing speedily especially with realization that new forms of competitive advantage have to be iden tified and innovated continuously, thereby creating unique capabilities that propel a company to greater heights (Mentzer, 2001).Advertising We will write a custom report sample on Integrated Supply (Logistics) Chain System specifically for you for only $16.05 $11/page Learn More As a result of this, companies’ strategic management aspects need to remain flexible individually as globalization continues to effect new challenges. One area that companies need to pay attention to is the area of logistics, specifically the one to do with logistic leverage, which is perceived to have the ability of enabling a company to achieve competitive advantage while effectively meeting the needs of its customers (Mentzer, 2001; Kersten, 2006). As competition continues to increase in all sectors of business, focus on customers is turning out as the source that companies are exploiting to better increase their competitive leverage. This brings in the idea of custom er-focused approach, which explains the need for companies to give attention and satisfy customers’ needs. The focus of this approach is on customer satisfaction (Mentzer 2001), which in return leads to establishment of customer loyalty for long-term cooperation. Logistics is a concept that is becoming a necessity in most organizations and can no longer be designed and implemented in the usual traditional way. As it was seen earlier, the business world is changing and this can be associated to different changes taking place in the business environment. As a result, an integrated component of logistics management is required to meet the increasing demands a company is subjected to. The purpose of integrated logistics, as envisioned by Swamidass (2000) is to support a company’s competitive strategy that, in turn, enables delivery of high levels of customer satisfaction. Integrated logistics constitutes a component that combines diverse logistics activities such as invent ory management, transportation, order processing, demand forecasting, documentation, packaging, parts support, warehouse management, and reverse distribution, where the aim is always to make these diverse parts more cohesive and function in unity (Swamidass 2000). Integrated logistics, therefore, perceives the different activities of logistics as interrelated components that involve a single value-added system, which in nature has to include facilities, equipment, people and necessary operating policies and procedures (Swamidass, 2000). In this way, integrated logistics is able to fulfill all needs, ranging from acquisition of raw materials to production and distribution. It must further be remembered that, in designing and implementing an integrated logistic system, key factors have to be put in consideration, which include customer demands and overall expectations, the magnitude of logistic costs for the company and all aspects that may influence the operation and function of the integrated system.Advertising Looking for report on business economics? Let's see if we can help you! Get your first paper with 15% OFF Learn More Therefore, the concept of integrated logistic system and management can be perceived to have the paramount role of aiding, increasing and coordinating decisions across various departments of a company, with an aim of providing a unified vision for the company’s activities. Integrated supply chain management system The truth that must be accepted in the modern world is that traditional logistics methods and practices are largely inefficient and inadequate in addressing the new needs of supply chain management. Due to this, it is essential for companies to embrace the idea of creating and adopting new logistics practices and technologies that link production and logistic processes including suppliers and customers in different locations (Stock, Greis and Kasarda, 2000). This calls for Trento Company to create logistic strategies that comprehensively address the issues of market, processes and information and be able to link them to customers’ needs and overall available company resources. Therefore, the logistic strategy to be created has to fulfill vertical integration aspects and also be able to positively establish relationships with members of the supply chain. What Trento Company should realize is that, apart from physical aspects that delivery system performs, there is need for enhancement of delivery of the desired quantity and quality of products to clients. To achieve this, critical role of coordination should be established in the company and this will require integration of information flow between supply-chain members (Porter and Miller 1985 cited in Stock, Greis and Kasarda, 2000). Information integration is evolving as the key aspect that is influencing workability of supply chain systems in different organizations, and this constitutes an element Trento cannot forego or ignore. The emergence of information integration as part of supply chain system revolves around the need to meet customers’ demands satisfactorily (Handfield a nd Nichols, 2002). As such, organizations are required to initiate ‘customer linking capabilities’ that enable an organization to communicate openly with different partners and clients, solve problems as a team, exchange vital supply management information through internet, effectively coordinate production planning and replenishment scheduling and work together to improve the supply chain system in the company (Harrison, Leung and Neale, 2005). Power (2005) observes that integrated supply chain process requires massive investment in cooperative arrangement and technologies, and at the same time has to be part of organizational strategy and implementation process. Problems that Trento faces revolve around inability to meet Elle’s orders in 10 days, too short lead time for finished shoes, hence inability to serve Elle Sport adequately, inadequate personnel to carry out supply chain needs, lack of computerized ordering system, hence numerous errors, and lastly, abs ence of coordination among various department which in turn affect entire supply chain system of the company. Arising from Trento problems is the pressing need to develop an integrated supply chain system that comprehensively will address various identified needs. Given that the management has realized this problem, it is prudent for fast-tracking of the process in order to save on the deteriorating problem of clients canceling orders with the company. To deal with the concept of an integrative supply chain system, it is essential to first outline what integration of supply chain is. According to Putzger (1998), integration of supply chain involves â€Å"attempts to elevate the linkages within each component of the chain, to facilitate better decision making and to get all the pieces of the chain to interact in a more efficient way and to create supply visibility and identify bottlenecks† (Power, 2005, p.2). This definition brings to limelight three elements that define an ef fective integrated supply chain system – information system management, inventory management and supply chain relationship management. Observed from Trento Company’s scenario is a situation that demonstrates little cooperation with its clients such as Elle Sport, lack of collaboration among its departments and lack of computerization systems. This calls for an integrated supply chain system to be created to address these aspects (problems) in a way that meets demand and needs of customers. In this way, the integrated supply chain system should be â€Å"characterized by cooperation, collaboration, information sharing, trust, partnerships, shared technology, and a fundamental shift away from managing individual functional processes, to managing integrated chains of processes† (Akkermans et al., 1999 cited in Power, 2005). An integrated supply system has to enable reduction in response time (lead time) required to meet clients needs, whereby, there is need to devel op a system that encourages direct distribution channel between Trento and its various customers (Poirier, 1999). Moreover, communication channel in the system needs to provide timely information between Trento, its suppliers and customers in a relationship that is collaborative in nature. Lastly, a computerized system has to be part of the integrated supply chain system, as this will ensure that transmission of data among departments, suppliers and clients is done in a speedy manner (Min and Eom, 1994). Resolving Elle Sport dilemma Elle Sport can be described as a dilemma, where the company has no clear picture on what to do on the Trento case. Trento Company is failing in its timely order delivery and the problem may persist given the manual ordering system at Trento coupled with lack of computerized system. It should be remembered that when Trento fails to meet targets and when errors occur in its delivery system, then Elle is likely to be affected enormously. The ever increasing completion in the market place forces business entities to value their customers. Thus, Elle would not want a situation where its customers get disappointed, or loyalty reduces. In this scenario, Elle has two options to undertake. The first is decision to continue cooperating with Trento, especially after Trento management realized the present problems and subsequently developing desire to change. The second option available is for Elle Sport to change (switch) to another supplier. Adoption of these two options requires cost-benefit analysis, from which Elle will be able to make a decision whether to maintain Trento or switch to another supplier. Switching suppliers in subjective view will be more costly given the need to establish cooperation with a new and totally different supplier. In an event of switching, Elle will have to invest in the relationship before genuine trust and integration of the company’s needs are effectively captured by the new supplier. As a result, it would be beneficial for Elle to embrace the desires of Trento to change and adopt a more efficient distribution system, computerize its systems, re-shape its supply management team and integrate its departments. Through participating in an effort to help Trento develop the modernized integrated logistics system cum supply management system, Elle would become part of an effective and efficient integrated supply system that address its needs appropriately. At the same time, by being part of the new integrated system, Elle would ensure a flexible system is created that can meet its changing needs more effectively with fewer problems. In other words, the two organizations can develop integrated supply chain systems that are linked and interdependent, making it possible and easy to fulfill the needs of two companies in a more productive and cooperative way. Developing an integrated logistics system for Trento Given that Elle Sport will participate and be part of a team that should see c hanges at Trento, it is envisioned that there will be development of an integrated logistics system that has features of reliability, maintainability and supportability. This will largely focus on customer requirements while benefiting from coordination of supply support elements of the company (Sople, 2007). This idea is informed by the fact that the required integrated logistics system will operate interdependently with various logistic functions, which will need coordination of input from various departments. As a result, the current autonomy of departments at Trento will have to change and the departments integrated. This aspect is reinforced by Russell (2007), who observes that manufacturing, procurement, logistics, marketing and suppliers have to operate synergistically in cross-functional ways. Therefore, the integrated logistics management system should reflect aspects of â€Å"internal integration of functions† at Trento while at the same time encouraging â€Å"upst ream and downstream involvement of supply chain partners† (Russell, 2007). Development of an integrated supply system will need to go hand in hand with restructuring of the procurement and supply team at Trento Company. This will require increasing the number of staff and also employing the right people with skills and capabilities to live up to new challenges. More so, the manual system of ordering will need to be phased out, since it has demonstrated weaknesses in terms of limitless errors. This will pave way for establishment of an electronic data interchange system that is more efficient. This will also allow sharing of decision-making information among partners both up and down the supply chain. There are various advantages of paperless transaction. For instance, it will be possible to send documents among the various partners with regard to purchase orders, order confirmations, invoices and advanced shipment messages, all of which will all be standardized during the tran saction process. More so, interpretation and processing of transmitted messages will be channeled through the same data communication protocols via a communication network to the intended destination without incurring delay. At the same time, integrated supply chain system will see the development of computerization of the systems in the company by establishment of electronic ordering systems (Chiu, 1995). The electronic ordering system will minimize the numerous errors currently witnessed in the company from verbal ordering. This will also result in automation of stock ordering and placement by the various partners of the company. Through this, it will be possible to reduce the waiting time before product is either delivered or manufactured (Russell 2007). ISCM Systems Architecture This would constitute the ideal integrated logistics system that Trento can develop and implement. This logistic system has the features of enabling the company, its suppliers and customer, access to inf ormation of supplies and distribution through the use of Web portals (Lan and Unhelkar, 2006). Web services subsequently establish common graphical interface that enables access of supply chain data by the company, its suppliers and clients. In this way, information about supplies of products and overall supply needs can be viewed more easily. In more related way, the system can enable both customers and suppliers to customize their needs, whereby, it becomes possible to order and monitor the specific product desired as it moves from the manufacturer to warehouse to retailer and subsequently, as it enters distribution channel. As a result, the customer is able to relay any information to the company’s system and appropriate action is taken promptly. Moreover, Trento is able to coordinate its suppliers and updating them on time; and in return, the suppliers have the opportunity to be integrated in the system, allowing the decision-making process to be aligned to the needs of c ustomers in the system. This particular system is supported by a messaging infrastructure, which provides link to the underlying applications in the system (Lan and Unhelkar 2006). The applications system contains the company’s business and data access aspects that are critical in performing operations. This may include access to SCM functionality, ERP systems, and decision support system (Lan and Unhelkar 2006). Functionality and success of this system will depend on critical aspects that Trento Company will need to adopt. The first is the need for creation of shared vision to integrate divergent opinions for successful implementation of the supply chain system (Lan and Unhelkar 2006). Other aspects to adopt include the need to create a cross-organizational implementation team, integration of internal information system, re-engineering of inter-organizational business processes, and improvement of overall internal infrastructure conditions (Lan and Unhelkar 2006). Benefits o f integrated supply chain systems Trento will accrue numerous benefits from the integrated logistic systems upon implementation. This will, in turn, translate to overall organizational change with regard to meeting customer demands. Some of the anticipated benefits from integrated systems include increased communication speed and decrease in cost of communication, as well as improved inventory and customer service (Beyer, 2010). At the same time, the systems will be able to reduce distortion effect that may arise as a result of unplanned demand forecast, since appropriate information is available regarding supply chain. Moreover, the systems are going to initiate and sustain long-term relationships between Trento and its suppliers and clients, as only a few, if any, problems will be manifested unlike before. Lastly, integrated supply systems will improve customer service delivery as feedback will be timely retreated and acted upon. Conclusion As dynamism continues to impact business es, it is evident that traditional supply and logistics strategies need redress. This can be evidenced in the numerous problems Trento has exhibited. Nevertheless, by deciding to undertake a comprehensive design of its distribution system, Trento realizes the need to remain competitive in the market. Clients’ needs and the overall goal to satisfy customer efficiently requires the company to adopt the most efficient integrated supply chain system. The input provided by Elle Sport should ignite Trento to stay abreast to the changing needs in supply chain management; and through this, the company will be able to cater adequately to the needs of its clients and suppliers. Therefore, the report has observed that Elle needs not to switch suppliers, as this will be costly; instead, it can dedicate part of its resources and capacity into helping Trento design an effectively integrated supply chain system. The long-term benefit of this will see Elle realize numerous opportunities at r educed cost. Reference List Beyer, S 2010, Supply Chain Performance Measurement E-Business Supply Chain Management: Including a Practical Excursus on the Intel Case: Operations Strategy – Supply Chain Management, GRIN Verlag, Berlin. Chiu, HN 1995, ‘The integrated logistics management system: a framework and case study’, International Journal of Physical Distribution and Logistics Management, Vol. 25, No. 6, p. 422. Gunasekaran, A and Ngai, EW 2004, ‘Information systems in supply chain integration and management’, European Journal of Operational Research, Vol. 159, pp. 269-295. Handfield, RB and Nichols, EL 2002, Supply chain redesign: transforming supply chains into integrated value systems, FT Press, New Jersey. Harrison, TP, Leung, LH and Neale, JJ 2005, The practice of supply chain management: where theory and application converge, Springer, NY. Kersten, W 2006, Managing risks in supply chains: how to build reliable collaboration in logistics, E rich Schmidt Verlag, Berlin. Lan, Y and Unhelkar, B 2006, Global integrated supply chain systems, Idea Group Inc (IGI), NY. Mentzer, JT and Williams, LR 2001, The role of logistics leverage in marketing strategy, Journal of Marketing Channels, Vol. 8, No. 3, p.4. Min, H and Eom, S.B 1994, An integrated decision support system for global logistics, International Journal of Physical Distribution and Logistics Management, Vol. 24, No. 1, pp. 29-39. Power, D 2005, ‘Supply chain management integration and implementation: a literature review’, Journal of International Supply Chain Management, Vol. 10, No. 4, pp. 252-263. Poirier, CC 1999, Advanced supply chain management: how to build a sustained competitive advantage, Berrett-Koehler Publishers, CA. Russell, SH 2007, Supply chain management: More than integrated logistics’, Air Force Journal of Logistics, Vol. 1, No. 2, pp.55-63. Sople, VV 2007, Logistics management: The supply chain imperative, Dorling Kindersley Pvt . Ltd, New Delhi. Stock, GN, Greis, NP and Kasarda, JD 2000, ‘Enterprise logistics and supply chain structure: the role of fit’, Journal of Operations Management, Vol. 18, pp. 531-547, London: Elsevier Science Publishers. Swamidass, PM 2000, Encyclopedia of production and manufacturing management, Springer, New York. This report on Integrated Supply (Logistics) Chain System was written and submitted by user Delaney U. to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Thurgood Marshall

Thurgood Marshall Overview When Thurgood Marshall retired from the U.S. Supreme Court in October 1991, Paul Gerwitz, a law professor at Yale University wrote a tribute published in The New York Times. In the article, Gerwitz argued that Marshall’s work â€Å"required heroic imagination.† Marshall, who had lived through Jim Crow Era segregation and racism, graduated from law school ready to fight discrimination. For this, Gerwitz added, Marshall â€Å"really changed the world, something few lawyers can say.† Key Achievements First African-American to be appointed to the U.S. Supreme Court.Wins 29 U.S. Supreme Court cases, helping to overturn segregation in public schools and transportation these cases include Brown v. Board of Education as well as Browder v. Gayle. Established the NAACP Legal Defense Fund, serving as first president and counsel-director.Awarded Presidential Medal of Freedom from William H. Clinton. Early Life and Education Born Thoroughgood on July 2, 1908, in Baltimore, Marshall was the son of William, a train porter and Norma, an educator. In the second grade, Marshall changed his name to Thurgood. Marshall attended Lincoln University where he began protesting against segregation by participating in a sit-in at a movie theater. He also became a member of Alpha Phi Alpha fraternity.   In 1929, Marshall graduated with a degree in humanities and began his studies at the Howard University School of Law. Heavily influenced by the school’s dean, Charles Hamilton Houston, Marshall became dedicated to ending discrimination through the use of legal discourse. In 1933, Marshall graduated first in his class from Howard University School of Law.    Career Timeline    1934: Opens a private law practice in Baltimore. Marshall also begins his relationship for the Baltimore Branch of the NAACP by representing the organization in the law school discrimination case Murray v. Pearson. 1935: Wins his first civil rights case, Murray v. Pearson while working with Charles Houston. 1936: Appointed assistant special counsel for the New York chapter of the NAACP. 1940: Wins Chambers v. Florida. This will be Marshall’s first of 29 U.S. Supreme Court victories. 1943:   Schools in Hillburn, NY are integrated after Marshall’s win. 1944: Makes a successful argument in the Smith v. Allwright case, overturning the â€Å"white primary† existing in the South. 1946: Wins an NAACP Spingarn Medal. 1948: The U.S. Supreme Court strikes down racially restrictive covenants when Marshall wins Shelley v. Kraemer. 1950: Two U.S. Supreme Court wins with Sweatt v. Painter and McLaurin v. Oklahoma State Regents. 1951: Investigates racism in the U.S. Armed Forces during a visit to South Korea. As a result of the visit, Marshall argues that â€Å"rigid segregation† exists.    1954: Marshall wins Brown v. Board of Education of Topeka. The landmark case ends legal segregation in public schools. 1956: The Montgomery Bus Boycott ends when Marshall wins Browder v. Gayle. The victory ends segregation on public transportation. 1957: Establishes the NAACP Legal Defense and Educational Fund, Inc. The defense fund is a nonprofit law firm that is independent of the NAACP. 1961: Wins Garner v. Louisiana after defending a group of civil rights demonstrators. 1961: Appointed as a judge on the Second Circuit Courts of Appeal by John F. Kennedy. During Marshall’s four-year tenure, he makes 112 rulings which are not reversed by the U.S. Supreme Court. 1965: Handpicked by Lyndon B. Johnson to serve as U.S. Solicitor General. In a two-year period, Marshall wins 14 out of 19 cases. 1967:   Appointed to the U.S. Supreme Court. Marshall is the first African-American to hold this position and serves for 24 years. 1991: Retires from the U.S. Supreme Court. 1992: Recipient of the U.S. Senator John Heinz Award for Greatest Public Service by an Elected or Appointed Office by the Jefferson Awards. Awarded the Liberty Medal for protecting civil rights. Personal Life In 1929, Marshall married Vivien Burey. Their union lasted for 26 years until Vivien’s death in 1955. That same year, Marshall married Cecilia Suyat. The couple had two sons, Thurgood Jr. who served as a top aide for William H. Clinton and John W. who worked as a Director of the U.S. Marshals Service and Virginia Secretary of Public Safety. Death Marshall died on January 25, 1993.

Invention and Development of the Steam Engine

Invention and Development of the Steam Engine Steam engines are mechanisms that use heat to create steam, which in turn performs mechanical processes, known generally as  work.  While several inventors and innovators worked on various aspects of using steam for power, the major development of early steam engines involves three inventors and three principal engine designs.   Thomas Savery and the First Steam Pump The first steam engine used for work was patented by the Englishman Thomas Savery in 1698 and was used to pump water out of mine shafts. The basic process involved a cylinder that was filled with water. Steam was then delivered to the cylinder, displacing the water, which flowed out through a one-way valve. Once all of the water was ejected, the cylinder was sprayed with cool water to drop the cylinders temperature and condense the steam inside. This created a vacuum inside the cylinder, which then pulled up additional water to refill the cylinder, completing the pump cycle.   Thomas Newcomens Piston Pump Another Englishman,  Thomas Newcomen, improved on Slaverys pump with a design he developed around 1712. Newcomens engine included a piston inside of a cylinder. The top of the piston was connected to one end of a pivoting beam. A pump mechanism was connected to the other end of the beam so that water was drawn up whenever the beam tilted up on the pump end. To propel the pump, steam was delivered to the piston cylinder. At the same time, a counterweight pulled the beam down on the pump end, which made the piston rise to the top of the steam cylinder. Once the cylinder was full of steam, cool water was sprayed inside the cylinder, quickly condensing the steam and creating a vacuum inside the cylinder. This caused the piston to drop, moving the beam down on the piston end and up on the pump end. The cycle then repeated automatically as long as steam was applied to the cylinder.   Newcomens piston design effectively created a separation between the water being pumped out and the cylinder used to create the pumping power. This greatly improved  on the efficiency of Slaverys original design. However, because Saverys held a broad patent on his own steam pump, Newcomen had to collaborate with Savery to patent the piston pump.   James Watts Improvements Scotsman James Watt  significantly improved and developed the steam engine over the second half of the 18th century, making it a truly viable piece of machinery that helped start the Industrial Revolution. The first major innovation of Watts was to include a separate condenser so that the steam didnt have to be cooled in the same cylinder that contained the piston. This meant the piston cylinder remained at a much more consistent temperature, greatly increasing the fuel efficiency of the engine. Watt also developed an engine that could rotate a shaft, rather than an up-and-down pumping action, as well as a flywheel that allowed for smooth power transfer between the engine and the workload. With these and other innovations, the steam engine became applicable to a variety of factory processes, and Watt and his business partner, Matthew Boulton, built several hundred engines for industrial use.   Later Steam Engines The early 19th century saw major innovation of high-pressure steam engines, which were much more efficient than the low-pressure designs of Watts and the others steam-engine pioneers. This led to the development of much smaller, more powerful steam engines that could be used to power trains and boats and to perform a wider range of industrial tasks, such as running saws in mills. Two important innovators of these engines were American Oliver Evans and Englishman Richard Trevithick. Over time, steam engines were replaced by the internal combustion engine for most types of locomotion and industrial work, but the use of steam generators to create electricity remains an important part of electrical power production today.

The Effect of Sensory-Perceptual Information on Anxiety Level of Essay

The Effect of Sensory-Perceptual Information on Anxiety Level of Patients Coronary Artery Bypass Graft Surgery - Essay Example This project paper outlines the problem, provides a comprehensive literature review and describes the planned interventions that are designed to provide CABG patients with the sensory-perceptual information they need in order to reduce their level of anxiety and increase coping skills. The project will be carried out within a hospital setting, utilizing all patients undergoing CABG who are referred by the cardiac catheterization laboratory. Each intervention is described in detail. Interventions will include a 12-minute video presentation, an informational brochure and informational sessions with the main researcher. At the individual information session, the researcher will adapt the information presented to fit with the cultural background, linguistic preference and health beliefs of the CABG patient. Table of Contents Chapter 1 Background and need for the project 4 Purpose of the project 7 Significance of the project 7 Theoretical Framework 8 Chapter 2 Search strategy 9 Review of literature 9 Studies investigating the association between anxiety/depression and CABG 9 Studies providing systematic literature reviews 12 Studies on educational intervention and other factors 13 Summary and discussion 15 Chapter 3 Implementation procedures 16 Chapter 4 The Project Teaching Plan 18 Objectives 21 Materials 22 Vocabulary 22 Motivation 23 Chapter 5 Summary 23 Conclusions 23 Implications for nursing 24 Recommendation for further study 24 Appendix 25 References 28 Chapter I Background and need for the project Coronary artery bypass graft (CABG) surgery is a procedure that uses a healthy blood vessel to create a bypass, an arterial bridge, that allows blood to be routed around a blocked or diseased artery ("Coronary bypass," 2010). Typically the vessel used is taken from the patient's leg, although vessels from an arm, chest or the abdomen have also been used ("Coronary bypass," 2010). CABG restores normal blood flow to the heart, which produces a variety of beneficial e ffects, such as decreasing the risk for a heart attack. Furthermore, in many cases, the surgery reduces the symptoms being suffered by the patient, such as chest pain and shortness of breath. The principal goals of CABG are to alleviate the symptoms of angina, decrease heart attack risk and prolong and improve the quality of life (McKenzie, Simpson and Stewart, 2010). CABG is a procedure that is widely performed in all developed countries. The American Heart Association reported in 2005 that the annual procedure rate in the US was over 515,000 (Gallagher and McKinley, 2009). The procedure has a relatively low mortality rate and been proven to effectively alleviate the symptoms of angina (Gallagher and McKinley, 2009). Nevertheless, psychological problems, such as the development of anxiety and depression, have been widely reported in connection with patients who have undergone CABG surgery; and, it has been found that these psychological problems are often long-term, as research rep orts that anxiety and depression are evident in roughly one-fifth of CABG patients a year following the surgery (McKenzie, Simpson and Stewart, 2010). Problems with psychological adjustment can lead to adverse events. These adverse coronary events may include further hospitalization and even an increased incidence of mortality (McKenzie, Simpso

Knowing Your Audience Paper and Communication Release Essay - 2

Knowing Your Audience Paper and Communication Release - Essay Example As the whole event unfolded, the company took the action of keeping the families, friends, and the employees informed about the condition of the victims, at one point a video was played showing their condition; they were able to sing the national anthem. The constant communication relayed to the people was very important as it kept them with high hopes. The government presence also played a major role, as the workers were assured of government protection. Keywords: Audience, Communication, Mines, Report, Victims, Memo, Accident, Family, Friends, Employees, Protection, Expectation, Hope, Information Considerations to remember given different roles and the audiences According to Lundgren and McMakin (2013), one cannot communicate unless he or she knows the audience with whom to pass the message. It is a noble thing to know the audience to avoid limiting oneself to one form of communication. In this case of trapped miners, the audience comprise of the families, friends, workmates, and t he entire nation. All are very much depressed and hopeless; therefore, the information required is the one that will give them hope and expectation. They characteristics the information should have are highlighted as follows: The message delivered should carry a lot of hope and encouragement, and ensure the drafted information to be released should meet the people’s expectations, and to a larger extent, be persuasive and convincing. This will calm the people’s emotions. Communication given must outline the effort carried out to salvage the lives of the victims. It should also be timely; that is to say, the report should be released to the people early and updates given most frequently. This will enable the people to track the progress of the operation. The method of revealing information to the people should be carefully considered amongst the many forms like, face to face, written memos, emails, and press releases. The well chosen form should be the one that will reac h the targeted audience conveniently, in time, and provide a means of dialogue, if appropriate. For the case of San_Jos mines accident, psychologists had to review the video that was due to be revealed to the people. Potential need of the family members It should be noted that in such incidents, the families of the victims are the most traumatized audience, and at such moments, their great desire is to get the report concerning the well being of their loved ones. The first thing they would want to hear is that their loved ones are alive. According to the New York Times ( â€Å" Chile Mining Incident (2010),† 2011), during the rescue process, a modified telephone was provided to the trapped victims, they were thus able to sing their National anthem, and this caused a lot of jubilation amongst their relatives. This outlines that their key need is to know that they are alive. Another important requirement by the relatives is assurance in the rescue process; they would like the m atter be handled timely and their trapped relatives to come out alive. Potential needs of the employees The employees would like to know how the company has responded to the accident. They want their workmates be rescued, and they also want to know how the company is prepared to respond to such calamities, since they are much aware that they are in a similar risk. Additionally, their requirement is to see that the victims receive compensation from the company and that their job

Story begun Essay Example for Free

Story begun Essay He was a basic middle class male who was raised to respect women and never hit them. His name was John, an author of 2 best selling books and had started his own publishing house in short he got it all to be a best husband and father. He is my friend. His story begun when his wife wanted to have a sperm donor in order to get pregnant, even though their doctors agreed that both of them are physically fine and there’s no reason for his wife not to get pregnant and it was just 4 months since they are trying but it seems that his wife was on rush for everything. On a Saturday evening of 1994, his wife Maria slapped him so hard when disagree with her idea of having a sperm donor, he had confronted her not to do that again but instead she just verbally abused him by saying harsh things such as â€Å"Coward dog! † These things hurt him physically and emotionally. It hasn’t end there his wife’s friend left a note that his wife would just use him to have a baby and later on dumped him for divorce. Worst comes to worst when his wife was also hurt his mother physically which had resulted to a bone fracture in knees and hands. Look more:  the story of an hour literary analysis essay All of these incidents were reported to 911 but ironically who would believe in our society that a man could be called a battered husband? The police even threatened him that he will be arrested for trespassing (imagine in his own house, which he bought by his own money), if he will go back inside the house. Instead of arguing with the police and wait for the medical assistance for his mom, he just drove away and went to the nearest hospital and let the doctor examined his mother. As of today, John got his divorce and never saw his wife again, but the sad part of this is he got no justice at all. Imagine if the situation was reversed: the husband slapped his healthy wife for not having a child after 4 months of trying, shrugged off a written letter found by his wife where the husband agreed with his buddy about dumping his wife after tricking her to get pregnant, beat his wifes mother badly enough to required x-rays. Do you really believe the police and the courts would have treated that case in the same way? Nowadays we have so many crisis centers for abused and molested women and children. This centers helped them to get out and win the battle that they are facing but how about our counterparts? I mean those MEN in our communities, especially my friend, yes they can be also victims of violence, and they also need the same kind of attention and protection. Our society and government should take these laws in general and not by gender as what was John had experienced, people should not be biased about this matter just because the victim is a man.

The Government’s Spending Review 2010 :: American Government, Budgeting, Spending Plans

The Government’s Spending Review 2010 The way the government sets out its budget is through allocation of monies to different governmental departments. These departments then allocate monies for services such as, health, defence, welfare benefits etc. â€Å"The Spending Review is the way that the Government sets spending plans for each department over a period of several years† (Anon, 2010)[1]. On 20th October 2010, the Government announced substantial UK spending cuts with local authorities, police, defence and welfare budgets all reduced. As a result the Government intends to â€Å"cut  £81 bn from public spending over four years† (BBC, 2010)[2]. Up to 500,000 public sector jobs could go by 2014/15, as a result of the cuts programme, according to the Office for Budget Responsibility (HM Treasury, 2010)[3]. Over the last few years the gap between what the Government took in as income and what it had to borrow to spend on services grew significantly. The yearly gap between the Government’s income and what it spends is known as the ‘deficit’. In recent years this deficit has grown in size. The key outcome from the Spending Review 2010, was to set in train a process of cutting the deficit and to make it more manageable and affordable in the future years. The government intends to do this through, reduction in government spending, such as, savings from welfare reforms and increases in taxation, e.g. the increase in VAT to 20 percent in January 2011 (Williamson, 2010)[4]. In the UK the Government obtains its income mainly from taxation, National Insurance contributions and excise duties. Due to the recession which began in 2008, the Government’s income dropped, but Government spending continued to increase. The deficit last year (2009/10) was  £155 bn (Anon, 2010)[1]. This is the amount of additional money the Government had to borrow to be able to pay for its spending on governmental activities last year. Macroeconomics The UK Government is pinning its hopes in the growth of the British economy, to help increase its income from taxation and by reducing the size of the public sector. The Office for National Statistics (ONS,2010)[5], confirmed in its press release on 24th November 2010, that the â€Å"UK economy grew at 0.8% between July and September 2010†. The 0.8% figure represents a slow down from 1.2% in the second quarter, but is still better than had been expected in the summer (Grierson, 2010)[6].

Are there differences in the forms of Christianity and Judaism that are dominant in both the East and the West?

I would like to disagree with the statement that there are differences in the forms of Christianity and Judaism that are dominant in both the East and the West. Religion is a ritualistic institution. The rules, belief systems and also the goals of each specific religion are agreed upon and standardized across the globe. Whatever differences are seen between each are simply variations that come as a result of culture. There are cultural differences inherent between every nation. The difference is not a result of religion changing forms but of people having different ethnic traditions and cultural backgrounds.These alter religion only in the fringes, in the aspects where the most basic and core functions of the said religion are not applicable. For example, languages used in different Christian churches are different. This can result in a slightly different message but in the end there is only one core message: Jesus Christ is the Lord and Savior. Judaism, a stricter religious form tha n Christianity, is much the same in the West and in the East. Again, the difference lies only in the cultural difference and the developmental changes that occur as a result of being in different places.However, the skeleton, the framework, of the religion still holds true and thus I believe that there are no specific differences between Eastern and Western versions of religion except for cultural factors which cannot be helped and which do not affect the basic essence of religion Comment on James Otis’ response: I agree that the underlying values and traditions of teachings of religions like Christianity are essentially the same across the West and the East. The presentation of Otis’ ideas, however, seems to be confusing in that they try to tie up the different religions with one another.The problem is not the differences between religions but rather the difference between the practice of these religions in the West and in the East. I also disagree with the fact that slavery, self-preservation, and becoming a free nation are reasons for watered down versions of morality in the West. There are many nations in the East that were colonized by Western powers. Being colonies, most of the natives in these countries were subjected to statuses much like slaves in the East and were also at the receiving end of a strife for self-preservation and freedom.Following the logic of slavery, self preservation and free nationhood in the West, morals in the East should also have been watered down. This reasoning, therefore, does not hold and there is no reason to believe that these are the reasons for the differences of practice in Western and Eastern versions of Christianity and Judaism. It is a matter of culture and tradition and not of issues of nationhood and the like. QUESTION # 2 Response: I don’t think it’s fair that there should be a comparison of importance of people’s lives. However, in my opinion, Alexander the Great was able to con tribute the most to the development of Asia.Although he was a conqueror and although he subjugated different nations of Asia, he was also what I would consider to be the first instrument of globalization. He did not only encourage the interaction of cultures but he also established a unifying language as well as a unifying currency between the lands he conquered. Alexander the great encouraged the mingling of cultures between the West and the East. Debates still continue today to on whether Alexander wanted to better the world or whether he simply wanted to rule it. Either way, his legacy in Asia is indubitable.He was able to found at least 70 cities in both Asia and Africa. Alexander also established many trade routes in order to establish better economic flows between East and West which enriched both sides. Of the three men, I also believe that Marco Polo was able to affect the development of Asia the least. This is because all he was really known to have done was to travel and d ocument his travel along the Silk Road to China. I am not undermining the efforts of Marco Polo but in comparison with Alexander the Great and Genghis Khan’s contributions to Asia, he can easily be said to have contributed the least to the history of Asia.I believe that if it hadn’t been Marco Polo, someone traveling along the Silk Road would have eventually documented it too and it would have been their book that would have increased curiosity and interest in Asia. Marco Polo was by no means the first traveler along the Silk Road. However, he was the author of the most well-known book about travel to China. As a result, he has held a position of esteem in history. However, the efforts of Alexander the Great and of Genghis Khan in developing Asia far outstrip that of Marco Polo’s thus my belief that he has the least important role in the development and progress of Asia.Comment on Patrick Carter’s response: Genghis Khan was not only a conqueror bent on im proving military skills and on expanding the territory of his kingdom. Many negative impressions of Genghis Khan and his Mongolian Horde persist until today. However, it’s also true that he left many positive legacies for Asia. For one, he was responsible for the cohesion of the Silk Road. This allowed for the creation of better lines of communication and trade between the West and the East. Also, he was much like Alexander in that he tolerated different religions. This would explain why the religions of China persisted even after the Mongols ruled there.Genghis Khan was a strong leader who passed on his belief systems and passion to the Mongol rulers who came after him. Although Carter is right in saying that Marco Polo’s travels and writings increased knowledge about the East, this knowledge was only highly significant to those in the West. Development of Asia was not dependent on having the Western society learn more about Eastern customs and practices. Thus althoug h Genghis Khan was a military man with violent tendencies, I still believe that he was more able to enhance the growth of Asia as opposed to Marco Polo. QUESTION # 3 Response:The Mughal Dynasty was the ruling power over India around 1526-1720 while the Ming Dynasty ruled China during 1368-1644. The two dynasties overlapped chronologically and in terms of their contributions to both India and China, there have also been many similarities. Some of the major architectural works in both countries were created during these periods. The Taj Mahal and the Forbidden City are two of the most popular, although definitely not the only, structures from the Mughal and Ming Dynasty. Both dynasties showed a flourishing of the arts. Literature, music, and language grew and developed during both dynasties.Trade and economy also developed during both dynasties. In the Mughal dynasty, but not in the Ming dynasty, religion also flourished as the Mughal emperors were tolerant of different religious syst ems. With regards to economics, development was also different in form. In the Mughal dynasty, trade flourished thanks to the trade routes established to the Arabic and Turkish lands. In the Ming dynasty, on the other hand, economy flourished as a result of an imposition of higher taxes on richer individuals and redistribution of wealth and land to the poorer citizens.The Mughal dynasty was also able to adapt a new form of government, one that was centralized. This was not previously practiced in India. The Ming dynasty, on the other hand, simply adopted the form of government taken by the past dynasty, the Yuan Dynasty. In my opinion, both dynasties were able to contribute much to their respective countries. However, I also believe that the Mughal Dynasty contributed more to the present day life of India as opposed to the Ming Dynasty.Centralized government, tolerance for religion and the architectural works created during the Mughal Dynasty continue to permeate the lifestyle of th e citizens of India today. Also, the legacy of the Mughal Dynasty were unique to them. No dynasty before them were able to inspire such radical and important changes in India. The Ming Dynasty, on the other hand, was not the only dynasty to encourage the flourishing of arts in China. Its economic reforms were also not radically astounding that they changed the way of life of the Chinese up to this day. This is not to say that the legacy of the Ming Dynasty is irrelevant.It is simply an argument that it was not a greater cause of change in China as compared to the Mughal Dynasty’s effects on India. The Forbidden City, one of the greatest architectural works during that time, also had counterparts in past dynasties such as the Great Wall and the Great Canal. Visuals and literary works were also equally distributed across dynasties. It is my belief, therefore, that the Mughal Dynasty was able to contribute more to India. Comment on Shane Coursey’s response: Simply enumera ting the different aspects of both dynasties does not serve the purpose the response was supposed to have.It is not clear from this response in what ways both dynasties are similar and in what ways they are different. Yes, both dynasties are great in their own right but there is still a point of comparison with regards to which was able to contribute more to their respective countries. A dynasty, being a ruling power in a given country, is unique to that country and will therefore have striking differences from other dynasties within the same country and across dynasties of different countries. This should be the main thrust of the response.An analysis of which of the two dynasties was able to give more to either India or China. It is not a discussion of what these dynasties brought but rather, it is a discussion of how one fared in comparison to the other. In my opinion, India’s Mughal Dynasty fared better than China’s Ming Dynasty. This is seen when one dissects the aspects of both dynasties. There are clear differences both in economy and style of government. In terms of art and literature, both flourished but when placed in the context of the past Chinese dynasties, the Ming dynasty was not unique in this flourishing of the arts.Thus the Mughal Dynasty was able to contribute more to present-day India and its culture as opposed to the Ming Dynasty and present-day China. QUESTION # 4 Response: China, Korea, and Japan are thre Asian countries that are inextricably linked in terms of cultural roots. There are those that claim that all three nations are derived from an early form of Mongolian ancestry as the Mongols were very much scattered across Asia in the earlier parts of history. However, all three nations would also claim to have religious origins, believing themselves to have descended from gods, thus rejecting what common ancestor they might all have had.In terms of culture, however, it is very clear that both Japan and Korea have Chinese roots. Japan’s link with China may be explained by the fact that it was once colonized by mainland China during its early history. As a result, Japanese today are seen to utilize Chinese characters in their Japanese alphabet. Some games in Japan have Chinese origins. An example would be the Japanese game called Go which was actually derived from the Chinese board game Wei Ch’i. Korea, on the other hand, may be linked to China due to its proximity. The colonization of Korea by Japan may have also been a bridge for cultural transfer.There have also been numerous Chinese immigrants to Korea over time which may also explain the Chinese roots that Korea has today. Evidence of Korea’s link to China is the meditative practice of Son which was derived from the Chinese meditation of Chan. On another note, this also has a version in Japan which is called Zen. Despite similarities between the three countries, the differences between them remain clear. Because of Japan†™s isolation from the outside world, they were able to develop a unique culture separate from China and Korea. China’s long uninterrupted history has also assured it a unique identity.Korea, on the other hand presents a unique mixture of Chinese, Japanese and Mongolian culture based on the unique history of Korea, itself. Today, all three countries are on tenuous grounds with regard to their relationships. However, South Korea and China would seem to be more aligned as agreements between the two countries are under discussion. Japan and China, however, are finding it hard to look eye to eye in many issues as they have numerous controversies regarding economics, politics, and even technology. Comment on Nhia Francis’ response: The response failed to address the link between Korea and China.Although the relationship of China and Japan is clearer, there are links between Korea and China. How did the exchange in cultures occur? What mechanisms brought about the belief th at Japan and Korea have Chinese roots? Is it in terms of ancestry or is it simply because of the closeness of the cultures they exhibit? I agree that many of the cultural practices of Japan have derivations from China. However, does this indicate that Japan has Chinese roots? Or does it simply mean that their cultures are similar? Also, the relationship of the three countries today should be analyzed.

Competition Bikes, Inc. Costing Method and CVP Report Essay

A1. Costing Method Recommendation This report has been prepared to analyze the current costing method at Competition Bikes, Inc. (CBI) and provide a recommendation for improvement. To support this analysis, the differences between traditional based costing and activity based costing will be examined, along with the benefits and drawbacks for each method. A cost-volume-profit evaluation with break-even analysis for both sales units and sales dollars for the CarbonLite and Titanium bike lines will also be provided. The main differences between activity-based costing and the traditional costing: Traditional costing includes both direct and indirect components. Indirect costs (overhead) are grouped together. There’s only one cost driver (such as direct labor hours) used to calculate costs regardless of what they are. Activity-based costing breaks down the overhead costs into activity cost pools. All overhead costs are then allocated into these activity cost pools. This method of costing does require more time to c ompute the cost to the activity yet it earns that money back plus dividends by having a more accurate forecast of the true costs that are associated with each activity. In addition to a better understanding of costs, implementation of activity-based costing can drive improved financial results in the long run. By looking at each product and what drives its specific costs, management can have a much more detailed sense of the true costs involved in producing each product. They can then compare the activity-based costs with the costing system they have been using to discover what products they may be overpricing, or underpricing for sale in the market. They can also spot potential money wasting activities in their manufacturing process, and work to make those activities more efficient. If management has a better understanding of costs, they can present a stronger business case to get future capital projects funded. The downside to activity-based costing is that it requires a substantial commitment of personnel and financial resources up front. Management must be willing to examine their operations rigorously and the data that is gathered may be difficult to accept, particularly by those who are believe the current costing system is just fine and are resistant to change. Traditional costing, on the other hand, is much easier to calculate than activity-based costing, and this makes manager’s jobs easier. However, traditional costing is so generally calculated that it may be hiding inefficiencies in the supply chain. Products may be overpriced or underpriced, and this can negatively impact the company’s bottom line in the long run. By moving to the activity-based cost system, CBI could pinpoint if they have been overpricing items, losing market share to competitors. On the flip side, if they underprice an item, they are likely losing money as the price may be lower than what it costs to produce the bike. They would lose potential revenue to further fund research and development to improve the product for the future. If prices are significantly lower than those of the competition, customers may even hesitate to purchase the product, as they could wonder why the bike is priced so much lower than all the others in the market and have a perception that sub-par materials or manufacturing processes have been used. Since these bikes are a specialty product built to order, customers are generally not as price sensitive as shoppers looking for ready-made bikes. By switching to the activity based costing (ABC) method, CBI is also taking advantage of the in-depth knowledge of costs that will result in savings for the company. In the overhead analysis, six manufacturing overhead items and their cost drivers are identified, with a comparison provided between ABC costing, and Traditional costing assuming 900 units produced for the Titanium line, and 500 units produced for the Carbonlite line. The cost driver for manufacturing overhead using the traditional method is not identified, but the totals are given in the Competition Bikes spreadsheet and are reflected below. Traditional costing method -Titanium line manufacturing overhead cost: $239,020 -Carbonlite line manufacturing overhead cost: $232,380 Total traditional manufacturing overhead cost: $471,400 ABC costing method -Titanium line manufacturing overhead cost: $188,415 -Carbonlite line manufacturing overhead cost: $282,985 Total traditional manufacturing overhead cost: $471,400 It’s important to note that the manufacturing overhead totals are identical when calculated using both traditional and ABC methods. This is because it’s not a difference in overhead, but instead a change in where the overhead is allocated. In the case of CBI, the allocation is quite different between methods. For the Titanium line, the total manufacturing overhead cost with ABC costing is $50,605 lower than with traditional costing – a difference of 21%. In other words, CBI has overestimated manufacturing overhead for the Titanium line by 21% using traditional costing. Looking at unit costs, the traditional method per unit cost is $713, while the ABC unit cost is $656. The higher unit cost in the traditional costing method makes sense given that the allocation for manufacturing overhead was higher. CBI may be overpricing this bike, which could result in a negative effect on sales. If they could lower the price to a number closer to the true unit cost, they will likely see sales rise. For the Carbonlite line, the total manufacturing overhead cost with ABC costing is $50,605 higher than with traditional costing. CBI had underestimated manufacturing overhead for the Carbonlite line by 18% using traditional costing. Looking at unit costs, the traditional method per unit cost is $1,359, while the ABC unit cost is $1,460. The unit cost calculated using ABC costing was higher than CBI had realized; they are likely underpricing this bike, losing out on potential revenues. A review of competitors’ prices may be in order, to evaluate what the market will bear, as well as an analysis of the impact of raising prices and how that affects sales. Once they have this data, CBI management can make an informed decision whether or not to adjust the Carbonlite sales price, and by how much. A2a. Cost-volume-profit and break-even point evaluation: Current scenario CVP Analysis: Cost-volume-profit (CVP) analysis is a tool that managers and businesses often use to estimate future levels of operational activity needed to avoid financial losses, to break even, and to generate a profit. This analysis also helps to target future revenues. CVP analysis can also be used to estimate production levels needed to generate revenues sufficient to recoup capital expenditures such as operational expansion. CVP analysis examines changes in profits in response to changes in sales volumes, costs and prices. The basic CVP equation is sales minus variable costs = contribution margin. Sales revenues per unit for the Titanium product are set at $900. The variable cost per unit (costs that vary directly with volume) for the Titanium product is $679. Based on these numbers, the resulting contribution margin (sales revenue minus variable cost) per unit is $900 – $679 = $221. Contribution margin is the amount of profit left after variable costs are subtracted; therefore they c an be considered the ‘contribution’ to profit for each unit sold. For the Carbonlite product, the sales revenue per unit is higher at $1,495 due to the specialized materials and increased amount of labor required to manufacture the product. Variable cost is $1,384. The resulting contribution margin per unit is $1,495 – $1,384 = $111. It’s worth noting that the contribution margin for this product is much smaller than that for the Titanium line. A smaller contribution margin generally means the product is not as profitable. When multiple product lines are included in the analysis, to calculate total break-even sales units, a weighted average contribution margin (WACM) must be calculated. This is important because various products in the sales mix contribute different amounts of profit. The WACM is calculated by multiplying the unit contribution margin by the percentage of the total sales mix for each product. Expressed as a formula: WACM = Product one unit contribution margin (product one sales mix percentage) + product two unit contri bution margin (unit two contribution margin percentage) Incorporating the CBI data, with the sales mix proportion of 9 units of Titanium for every 5 units produced of Carbonlite, the WACM is calculated as 221 (.643) + 111 (.357) = $181.71. This number is what the average unit  contributes to CBI’s profit on a per unit basis. When the WACM is known, the Total Contribution Margin Dollars can be calculated. This is the amount of money that the company has to pay fixed costs. Any money left over after fixed costs are paid is profit. If total contribution margin dollars equal fixed costs, the company is at break-even. If total contribution margin dollars are less than fixed costs, that represents a loss for the company. The equation for this figure is: Total Contribution Margin Dollars: Units sold multiplied by the WACM Break-even analysis Break-even sales units can be calculated if the WACM and Total Contribution Margin Dollars needed to break-even are known, as follows: Total Contribution Margin Dollars/WACM. To calculate sales units and sales dollars required for break-even, a few steps are required. The first step is to calculate the break-even point in units of sales mix. Break-even point in units of sales mix = Total fixed cost/WACM per unit For CBI, break-even point in units of sales mix is $400,000/$181.71 = 2201 The next step is to calculate the number of units of Titanium and Carbonlite units at the break-even point. The equation is as follows: Number of units at break-even point = Sales mix ratio (total break even units) Break-even point in units for Titanium: 0.643 (2201) = 1415 Break-even point in units for Carbonlite: 0.357 (2201) = 786 The last step is to calculate the break-even point in dollars. The equation is as follows: Break-even point in dollars = Product units at break-even point (sales price per unit) Break-even point in dollars for Titanium: 1415 (900) = $1,273,500 Break-even point in dollars for Carbonlite: 786 (1495) = $1,175,070 Total sales needed to break-even: $1,273,500 + $1,175,070 = $2,448,570. To summarize, CBI would need to sell 1415 units of Titanium and 786 units of Carbonlite, generating sales revenues of $2,448,570 to break-even (revenues and costs are equal). A2b. Cost-volume-profit and break-even point evaluation: Variable and fixed cost increase scenarios Suppose management needed to increase the cost of direct materials by 10% as well as add  $50,000 in fixed costs to the production facility. What effect would this have on the break-even point? Because the equations are based on the contribution margin as well as the WACM, an increase in the cost of direct materials (variable costs) by 10% will have a significant impact. Let’s first examine how cost-volume-profit and break-even point would be impacted if management needed to increase direct materials cost by 10%. I will analyze the $50,000 fixed cost increase separately. Variable cost increase (10% direct materials increase) scenario CVP Analysis: Contribution Margin per unit for Titanium: $900 – $709 = $191 Contribution Margin per unit for CarbonLite: $1495 – $1451 = $44 The contribution margins for both product lines decreased. Titanium decreased by 13%, and of particular note is the whopping 60% reduction in contribution margin for Carbonlite. This makes sense given that Carbonline has a higher variable cost and lower volume, so a percentage increase in variable cost has a greater impact. This product is even more expensive to produce in this scenario, and generating very low profits for the company at this point. With the sales mix proportion of 9 units of Titanium for every 5 units produced of Carbonlite, the WACM per unit is calculated as 191 (.643) + 44 (.357) = $138.50. CVP Summary: the 10% increase in direct materials resulted in a 24% decrease in WACM per unit. The bikes are contributing 24% less profit towards profits. Break-even Analysis: Break-even point in units of sales mix is $400,000/$138.50 = 2888 Break-even point in units for Titanium: 0.643 (2888) = 1857 Break-even point in units for Carbonlite: 0.357 (2888) = 1031 Break-even point in dollars for Titanium: 1857 (900) = $1,671,300 Break-even point in dollars for Carbonlite: 1031 (1495) = $1,541,345 Total sales needed to break-even: $1,671,300 + $1,541,345 = $3,212,645 Break-even summary: the 10% increase in direct materials cost resulted in a reduced contribution margin per unit for both products. Given that fixed costs in this example were unchanged at $400,000, it makes sense that an increase in variable costs would require an increase in the break-even point to cover the additional expense. In this scenario, the break-even point in units and total sales need to break-even increased by 24% from the current scenario. It’s clear that an increase in variable costs can have a disproportionate impact on profits and the break-even point. Fixed cost increase ($50,000) scenario For this scenario, I assumed that variable costs remained unchanged from the current scenario (no 10% increase in variable costs) and that fixed cost for the production facility increased from $400,000 to $450,000. CVS Analysis: Contribution margin per unit for Titanium: $900 – $679 = $221 Contribution margin for per unit for Carbonlite: $1,495 – $1,384 = $111 With the sales mix proportion of 9 units of Titanium for every 5 units produced of Carbonlite, the WACM per unit is calculated as 221 (.643) + 111 (.357) = $181.71. CVS Summary: Since variable costs did not change in this scenario, the contribution margin per unit and weighted average contribution margin/unit are at the same level as the original example. Break-even Analysis: Break-even point in units of sales mix is $450,000/$181.71 = 2476 Break-even point in units for Titanium: 0.643 (2476) = 1592 Break-even point in units for Carbonlite: 0.357 (2476) = 884 Break-even point in dollars for Titanium: 1592 (900) = $1,432,800 Break-even point in dollars for Carbonlite: 884 (1495) = $1,321,580 Total sales needed to break-even: $1,432,800 + $1,321,580 = $2,754,380 Break-even summary: Compared to the current scenario, the $50,000 increase in fixed costs (11% over the $400,000 example in the current scenario) had an impact of increasing the break-even point in units of sales mix by 275  units, or 11%. Since the contribution margin was unchanged in this example, the increase is less than in the scenario with 10% increase in direct materials. The break-even point in dollars also increased by 11%. The fact that the increase in the break-even point exactly matches the increase in fixed costs illustrates that as fixed costs rise, the break-even point will rise in proportion assuming the sales mix remains unchanged. Comparing all three scenarios, the CVP and break-even analysis provides insight on how increases in variable and fixed costs affect contribution margins and break-even numbers. Variable cost increases have a disproportionate impact on increasing margins and break-even numbers, while the fixed cost increases result in a proportionate impact on increasing these measures. CBI’s management should consider these impacts when considering cost increases for their product lines.

JUST GETTING STARTED

JUST GETTING STARTED Put down that pen! Dont you even think about starting off your writing career with a book. Why? Because you havent become a writer yet. In all my conference classes, the first thing I tell people is this . . . BECOME A WRITER FIRST. A lot of people skip that part of the career the educational process, the word order, the flow, the friggin VOICE that so many people ignore. Thats why so much writing just muddies together. One big mass of earthworms, tangled together in a Kindle world. Just finished reading a short book about a ghost in Savannah. The writer has great potential. Shes even educated. Some comment she made on a blog made me buy the book. (Let THAT be another lesson for you.) However, she head hopped. She switched characters, disassociating pronouns. She skipped descriptions. It was so obvious that the material was in her head, but somewhere between her gray matter and her fingers, it got waylaid. So now, I associate her name with less-than-stellar writing. Premature writing is like a bad marriage. Its always in the background. Always a reminder. Sure, after enough years its remembered less, but seriously . . . do you want to wait years for a bad piece of work to fade away? Magazines. Start with magazines. No matter what you write, there are magazines you can write for. Yes, youll be rejected, as you should. Yes, youll get frustrating coming up with unique ideas, as you should. But magazine writing is the jumping off point for all writers, in my opinion. That and/or newspapers. No, Im not belittling either profession, but your opportunities are more and you learn lessons faster when you have to meet deadlines, or have to eat from the articles you sell. Romance, mystery, sci-fi, nonfiction, all exist. But write about anything . . . everything. Test yourself. If you think you have the guts, um, prowess, to write anything book-length, then magazine articles should not be daunting. Reasons to start with magazine writing: You learn how to carefully choose your words in a small space. (i.e., writing tight) YOu learn how to adhere to an editors needs. You learn how to write faster. You learn how to research, and cull that research since youll never need it all. You earn money, always a good thing. You earn clips, which actually show that . . . you are a writer. Tough love time. If an editor sees your

4 Top Secrets to Professional Success for Millennials

4 Top Secrets to Professional Success for Millennials Like the Baby Boomers before us, the Millennials are fast becoming a major force in the workplace. As we move onto career paths from school and internships, there are new challenges to the status quo. But how do we negotiate those- and more importantly, how do we help define what we want the workforce to be as we move forward? 1. Build Your Brand Like It’s Your Job.More than ever, social media is a factor in hiring. Keeping a close eye on what you put out there on Instagram, Vine, Twitter, etc. is an essential way to manage your professional image. Share content relevant to your field, and monitor who’s reposting and engaging you on that content. And for the goofy/personal stuff? Set up a private account that’s just for you and your social crew, and make sure it’s entirely separate from your â€Å"Janie Smith, Marketer Extraordinaire† profile.2. Think Outside the 9-to-5 Box.One of the defining moments for the Millennial generation of workers was the economy crash of 2008. Younger workers were often lost in the shuffle as jobs were cut all over the place. But that wasn’t necessarily doom- it was a wake-up call that maybe the standard 9-to-5 job isn’t the only way to go. Many people can make their career work as freelancers, part-time workers while pursuing other opportunities, teleworkers, and other nontraditional employees. Being flexible may be the best option for you.Also, don’t hesitate to use non-paid experience as a selling point on your resume. If you picked up stellar office communications during your internship, say so. If you developed rockstar time management skills during your volunteer gig, list it.3. Play the Long Game.Plan ahead. Retirement may be a long time away, but there’s an awful lot that can happen in the meantime. Be smart about financial planning, but also about whether you’ll want to have a family at some point, or start your own business. The earlier you get started f actoring long-term goals in to your plans, the easier it will be to actually set them in motion when the time comes.4. Think About More Than Money.A high-paying job in your chosen field is The Dream†¦ who doesn’t want that? But there may come a time when you need to consider whether other factors are just as important as the salary figure. Flexible work arrangements, vacation time, and the ability to travel may end up being just as golden to you as a slightly higher paycheck.   Definitely take your priorities into consideration during any hiring and negotiation process.As Millennials face a unique moment in their career paths, you should see it as a chance to take hold of the process and find ways to develop it (and yourself) into the professional world you’d like to see.

1.Compare the civilization in the Indus Valley with the civilizations Essay

1.Compare the civilization in the Indus Valley with the civilizations in Mesopotamia and Egypt. Consider such factors as geography, social structure, technology, economics, religion, etc - Essay Example However by 2500 BC the two great cities of Harappa and Mohenjo-Daro were well established. There is not known evidence to state whether this civilization was inspired by Mesopotamia and Egypt or had the local development on its own. The changes in environment, population and evolution of technology are the reason for emergence of the civilized societies. The quality of the cities built by baked bricks of same size proves the knowledge of planning and development and their priority to maintain hygienic conditions. Although the houses were of different sizes yet the city possessed remarkable egalitarianism. The streets were laid in a grid pattern with houses protected from any pollution and thief’s intruding. City obtained the desired water from wells and drained the waste water to the closed drains proving the improved drainage and sewage system. There were no temples or pyramids in the city during Indus civilization unlike Ziggurats (temple) of Mesopotamia, that were built high with houses of priests, shopkeepers and merchants in city center and government buildings around the Ziggurats and the houses were made of mud-bricks but the pyramids, temples, palaces and tombs made of stone and rich in art and architecture in Egypt. The Indus civilization was laid by the river Indus that played a vital role in the lives of people by Indus as it provided fertile land for agriculture purpose. The Deccan Plateau and Himalayas located around the valley protect the people of Indus civilization from invaders. While the Mesopotamia civilization laid by the rivers Tigris and Euphrates with mountains on the east and deserts on the west of Mesopotamia. Egypt civilization laid by the river Nile on north is bound by dessert on east, west and south protecting from all influences, thus evolving on its own. The Indus Valley people used animals like camels, oxen and elephants as means of transportation. The carts

Bioterrorism Essay Example | Topics and Well Written Essays - 750 words

Bioterrorism - Essay Example Not only were soda bottle with fruit juices, carbonated drinks or colas attacked, but also bottled mineral water, beer bottles and even cans. The terrorist had a few units where the botulism toxin was manufactured on a large scale and just a few milliliters of the toxin had to be introduced into each bottle of soda. Even milk was supposed to be attacked and milk bottles were found to be infected (Wein 2005). People across the US feel sick on consuming the contaminated food product. Some of the common symptoms that were noted included double vision, slurring of the speech, drooping of the eyelids, difficulty in swallowing, muscle weakness, berating difficulties, dry mouth, general body weakness, etc (CDC 2012). Young children and adolescents who especially consume high amounts of these drinks were the targets and required immediate hospitalization. Many of the patients with serious respiratory problems need admission to the ICU and ventilator support. The mortality rates were also hig h. In total, there were about 3200 cases of botulism reported throughout the US within the first 5 days, about 2300 people required admission to the hospital, 450 were critically ill and required ventilator support and 400 had mortalities. ... It may strongly be suspected that the people involved in these attacks may have introduced certain toxic substances into dairy animals across the US in order to demonstrate that the contamination of food and other products were linked to the animal deaths due to infections. However, the biggest evidence to demonstrate that the outbreak of botulism was a suspected terrorist attacks was the contamination of soda drinks and sodas. The water being used for manufacture and drinking water was also suspected. However, a majority of the US cities and soft drink manufacturers used chlorinated water and there are no chances that botulism contaminates naturally. 2. Describe how the outbreak characteristics would have been different in the above scenario, if the outbreak had been natural, rather than intentional. A natural outbreak of botulism already has mechanisms by which ultimately the people who consume the products are not infected. For example, water that may be contaminated would be trea ted with chlorine. Soft drinks are prepared using chlorinated water and milk is pasteurized before being packaged. Even some of the foods are disinfected before reaching the ultimate consumer (Medinet 2012). The second most startling fact that the outbreak was intentional was that it occurred through various cities in the US simultaneously. More than 10 major cities in the US were attacked and most of these cities were high consumers of soft drinks and dairy products. The last fact that suggested that this was an intentional outbreak was through various molecular laboratory tests conducted on the contaminated food product, the microorganism isolated was one particular strain, and this strain was one of the most virulent strains that produced large quantities of the

Pericles Funeral Oration (after 490 BCE) from Thucydides, The Essay

Pericles Funeral Oration (after 490 BCE) from Thucydides, The Peloponnesian War - Essay Example Historians and scholarly readers may find this oration packed with clues and information on the culture, government and economy of Athens in Pericles’ era yet its validity raises speculations among others. The eloquence of Pericles’ testimonies, as recorded by the Greek historian Thucydides, could indeed make a reader believe his description of Athens as the real Athens. Pericles described Athenians as people with a sense of pride and a hint of arrogance as he restated their glories through every battle and the gratifying courage and character of each Athenian. He praised their ability to live their life as they wanted both in time of peace and war, and noted that they can still have pleasure and relaxations even in the time of difficulty. Athenians, as he described, acquired homes satiated with beauty and goods from their lands and from other country (Brians par.6). He further boosted the morale of the soldiers and their families as he sang in praises that â€Å"Our enemies have never yet felt our united strength† (Brians, par.7) claiming their military force to be as invincible once fought in union. This strength sterms from education and training instituted from the early ages of the Athenians therefore making them audacious and confident at every peril they may come across. Power, versatility and grace are the forces that embrace each Ath enian’s personality making them a country envied by their neighbors. He further described their government as democratic â€Å"for the administration is in the hands of the many and not of the few† – a picture of a perfect nation in the hands of the people (Brians par.7). It can be noticed that only a few words were dedicated to confer the flaws of Athens such as presence of poverty in their economy and unequal treatment for the women (Brians par.12). Instead it was soaked in positivity and praise. This speech can be a basis for